UPDATED ANSI STANDARDS

For Cut Resistance
ANSI/ISEA 105 (2016 edition)

The American National Institute (ANSI) has released a new edition of the ANSI/ISEA 105 standard (2016 ed.). The changes include new classification levels, which includes a new scale to determine cut score (commonly referred to as the ANSI cut score), and a revised method for testing gloves to the standard.

 

New Scale to Determine Cut Scores

The new ANSI standard now features nine cut levels significantly reducing the gaps between each level and better defining protection levels for the cut resistant gloves and sleeves with the highest gram scores. The graph below shows the differences between the old scale and the new scale. New ANSI cut scores will feature and "A"  of the score

 


 

New Testing Standard

The new edition of the ANSI/ISEA 105 Standard (2016 ed.) also outlines a new test method for determining the new cut scores. The new ASTM F2992-15 test method allows for only one type of machine to be used, the TDM-100. Under the previous ANSI standard, the old test method ASTM F1790-05, the testing could be performed on either the TDM-100 machine or the CPPT machine. By ensuring uniform testing with one machine, it is easier to compare gram scores for a given material.

 

Understanding ASTM F2992-15 Test Methods

The samples are cut by a straight-edge blade, under load, that moves along a straight path. The samples is cut five times each at three different loads with a new blade for each cut and teh data is used to determine the required load to cut through the sample at a specified reference difference. This is referred to as the cutting force , which is then equated to a cut level.